"Fill and Flip" Microplate Bead Loader
The Fill and Flip Microplate Loader is simple to use and much faster than adding beads, one-at-a-time, to 96-well microplate wells. Handles a variety of loading needs including both spherical and irregular shaped bead media. Providing they are pourable and dry, seeds, milled agicultural products, resins and powdered solid chemicals can also be loaded.
The Microplate Bead Loader Kit consists of a bead loading platform with spatula , two different sized s.s. frames, one 0.3 ml 'measuring' microplate and one 1 ml 'measuring' microplate.
Our Price : $0.00
"Fill & Flip" Microplate Bead Loader Set transfers, in one manual motion, 0.3 or 1 ml of beads into a 96-, deep well microplate. A stainless steel frame aligns a pair of 96-well microplates, one pre-loaded to the top with beads (the "measuring" plate). Upon manual inversion of the paired plates, the beads fall into the second, larger capacity 96-well microplate (the "receiving" plate). Suitable for bead sizes from 0.1 mm diameter to 6 mm diameter. the "Flip & Fill" Bead Loader handles irregular, sharp particle media as well as spherical media.
How it works..
1) Using the provided bead loading tray, pour the beads out of its bottle into a 96-well microplate (the 'measuring' microplate) Level the beads with the spatula until all wells are filled to the top with beads.
2) Place a selected tight fitting, stainless steel frame over the loaded 'measuring' microplate.
3) Insert into the frame, up-side-down, a larger capacity 96-well "receiving" microplate. The upper surfaces of the two plates contact each other.
4) Transfer the beads by manually inverting the pair of microplates.
| Select | 101B |
You May Also Be Interested In...
"Suction" Microplate Bead Loader
Of the three bead loaders we offer, the Suction-type 96-well, deep well Microplate Bead Loader is the fastest - Beads can be loaded into 96 deep well microplates at a rate of about 10 microplates per minute. It is limited to loading spherical glass or ceramic beads only (i.e., not irregularly shaped particles,heavier steel beads or non-beads, such as seeds and pourable chemicals). The loader delivers a 0.4 ml load of beads to each well and is compatible with all 96-well, deep well microplates.
The Suction-type Microplate Bead Loader includes a polycarbonate/polystyrene bead-loading manifold, a hand-held 115V AC vacuum unit and an on/off footswitch.
Read more >Price: $395.00
LabTie™ "Gravity" Bead Loader
BioSpec is your source for LabTie™ Bead Loaders. The highly versitile dispenser, custom fit to your application, can quickly and accurately dispense beads, powders, seeds and irregular small partricles into a variety of industry standard plates, tubes, vials, or trays. This gravity-type loader can dispense a wide variety of sizes, shapes, densities, amounts, and volumes.
A variety of LabTie dispensers are offered below and custom dispensers are available to fit your specific needs. Please select the Specifications Tab below to find the appropriate part number for your application. Then highlight this catalog number in the drop-down box below and add the item to your cart.
Read more >
