For the best experience on the Abcam website please upgrade to a modern browser such as Google Chrome If incorrect, please enter your country/region into the box below, to view site information related to your country/region. Custom solutions & partnerships Custom antibody development and commercial partnerships to advance your diagnostic and therapeutic discovery. Keep up to date with the latest events Full event breakdown with abstracts, speakers, registration and more View global event calendar ​​General procedure for flow cytometry using a primary antibodyand conjugated secondary antibody.Print this indirect flow cytometry protocol.Download our membrane staining summary.Indirect labeling requires two incubation steps, firstly with a primary antibody, then with a compatible secondary antibody. The secondary (and not the primary) antibody has the fluorescent dye (FITC, PE, Cy5®​, etc) conjugated. Please note that this is a general protocol, and you may need to adapt it for your applications. General procedure:Harvest and wash the cells then determine the total cell number.Cells are usually stained in polystyrene round bottom 12 x 75 mm2 Falcon tubes. However, they can be stained in any container for which you have an appropriate centrifuge, egtest tubes, eppendorf tubes, and 96-well, round-bottomed microtiter plates. In general, cells should be spun down hard enough so that the supernatant fluid can be removed with little loss of cells, but not so hard that the cells are difficult to resuspend.It is always useful to check the viability of the cells, which should be around 95% and not less than 90%.Resuspend the cells to approximately 1-5 x 106 cells/ml in ice cold PBS, 10% FCS, 1% sodium azide.Use ice-cold reagents/solutions and keep cells at 4°C as low temperature and presence of sodium azide prevent the modulation and internalization of surface antigens, which can produce a loss of fluorescence intensity.Add 100 μl of the cell suspension to each tube.Add 0.1-10 μg/ml of the primary antibody. Dilutions, if necessary, should be made in 3% BSA/PBS.Incubate for at least 30 min at room temperature or 4°C in the dark.Wash the cells 3 times by centrifugation at 400 g for 5 min and resuspend them in ice-cold PBS. You may need to adjust the conditions of the centrifugation (force and time) for the cell types used.Dilute the fluorochrome-labeled secondary antibody in 3% BSA/PBS at the optimal dilution (according to the manufacturer’s instructions) and then resuspend the cells in this solution.Incubate for at least 20-30 min at room temperature of 4°C. This incubation must be done in the dark.Wash the cells 3 times by centrifugation at 400 g for 5 min and resuspend them in ice-cold PBS, 3% BSA, 1% sodium azide.Store the cell suspension immediately at 4°C in the dark.Analysis: For best results, analyze the cells on the flow cytometer as soon as possible.We recommend analysis on the same day. For extended storage (16 hr) as well as for greater flexibility in planning time on the cytometer, resuspend cells in 1% paraformaldehyde to prevent deterioration.FIXATION:If you need to wait longer than 1 hr before analysis, you may need to fix the cells after step 5. This can preserve them for several days (this will stabilize the light scatter and inactivate most biohazardous agents). Controls will required fixation using the same procedure. Cells should not be fixed if they need to remain viable. There are several methods available. The fixation for different antigens will require optimization by the user.Paraformaldehyde 0.01% to 1% for 10-15 min only, 100 µl per sample.Acetone or methanol:N/B polystyrene/plastic tubes are not suitable for use with acetoneAdd 1ml ice-cold acetone to each sample.Mix gently. Place at -20°C for 5-10 min.Centrifuge, wash twice in PBS 1% BSA.Do not add sodium azide to buffers if you are concerned with recovering cell function, egif cells are to be collected for functional assays. It inhibits metabolic activity.Check out our free online flow cytometry training, designed to help you achieve the most withthis powerful technique.

>>> 更多资讯详情请访问蚂蚁淘商城