StressMarq蚂蚁淘在线

Alkaline Phosphatase, APC, ATTO 390, ATTO 488, ATTO 565, ATTO 594, ATTO 633, ATTO 655, ATTO 680, ATTO 700, Biotin, FITC, HRP, PE/ATTO 594, PerCP, RPE, Streptavidin, Unconjugated

PerCP

Overview:

Peridinin-Chlorophyll-Protein Complex
Small phycobiliprotein
Isolated from red algae
Large stokes shift (195 nm)
Molecular Weight: 35 kDa

PerCP Datasheet

PerCP Fluorophore Absorption and Emission Spectrum

Optical Properties:

λ_ex = 482 nm

λ_em = 677 nm

ε_max = 1.96 x 10⁶

Laser = 488 nm

PE/ATTO 594

PE/ATTO 594 is a tandem conjugate, where PE is excited at 535 nm and transfers energy to ATTO 594 via FRET (fluorescence resonance energy transfer), which emits at 627 nm.

Overview:

High fluorescence yield
High photostability
Very hydrophilic
Excellent solubility in water
Very little aggregation

PE/ATTO 594 Datasheet

PE-ATTO 594 Fluorophore Conjugate Excitation and Emission Spectra

Optical Properties:

λ_ex = 535 nm

λ_em = 627 nm

Laser = 488 to 561 nm

FITC (Fluorescein)

Overview:

Excellent fluorescence quantum yield
High rate of photobleaching
Good solubility in water
Broad emission spectrum
pH dependent spectra
Molecular formula: C₂₀H₁₂O₅
Molar mass: 332.3 g/mol

FITC-Fluorescent-conjugate

FITC Fluorescein Fluorophore Excitation and Emission Spectra

Optical Properties:

λ_ex = 494 nm

λ_em = 520 nm

ε_max = 7.3×10⁴

Φ_f = 0.92

τ_fl = 5.0 ns

Brightness = 67.2

Laser = 488 nm

Filter set = FITC

ATTO 700

Overview:

High fluorescence yield
Excellent thermal and photostability
Quenched by electron donors
Very hydrophilic
Good solubility in polar solvents
Zwitterionic dye
Molar Mass: 575 g/mol

ATTO 700 Datasheet

ATTO 700 Fluorophore Absorption and Emission Spectrum

Optical Properties:

λ_ex = 700 nm

λ_em = 719 nm

ε_max = 1.25×10⁵

Φ_f = 0.25

τ_fl = 1.6 ns

Brightness = 31.3

Laser = 676 nm

Filter set = Cy®5.5

ATTO 680

Overview:

High fluorescence yield
Excellent thermal and photostability
Quenched by electron donors
Very hydrophilic
Good solubility in polar solvents
Zwitterionic dye
Molar Mass: 631 g/mol

ATTO 680 Datasheet

ATTO 680 Fluorophore Absorption and Emission Spectrum

Optical Properties:

λ_ex = 680 nm

λ_em = 700 nm

ε_max = 1.25×10⁵

Φ_f = 0.30

τ_fl = 1.7 ns

Brightness = 37.5

Laser = 633 – 676 nm

Filter set = Cy®5.5

ATTO 655

Overview:

High fluorescence yield
High thermal and photostability
Excellent ozone resistance
Quenched by electron donors
Very hydrophilic
Good solubility in polar solvents
Zwitterionic dye
Molar Mass: 634 g/mol

ATTO 655 Datasheet

ATTO 655 Fluorophore Absorption and Emission Spectrum

Optical Properties:

λ_ex = 663 nm

λ_em = 684 nm

ε_max = 1.25×10⁵

Φ_f = 0.30

τ_fl = 1.8 ns

Brightness = 37.5

Laser = 633 – 647 nm

Filter set = Cy®5

ATTO 633

Overview:

High fluorescence yield
High thermal and photostability
Moderately hydrophilic
Good solubility in polar solvents
Stable at pH 4 – 11
Cationic dye, perchlorate salt
Molar Mass: 652.2 g/mol

ATTO 633 Datasheet

ATTO 633 Fluorophore Absorption and Emission Spectrum

Optical Properties:

λ_ex = 629 nm

λ_em = 657 nm

ε_max = 1.3×10⁵

Φ_f = 0.64

τ_fl = 3.2 ns

Brightness = 83.2

Laser = 633 nm

Filter set = Cy®5

ATTO 594

Overview:

High fluorescence yield
High photostability
Very hydrophilic
Excellent solubility in water
Very little aggregation
New dye with net charge of -1
Molar Mass: 1137 g/mol

ATTO 594 Datasheet

ATTO 594 Fluorophore Excitation and Emission Spectrum

Optical Properties:

λ_ex = 601 nm

λ_em = 627 nm

ε_max = 1.2×10⁵

Φ_f = 0.85

τ_fl = 3.5 ns

Brightness = 102

Laser = 594 nm

Filter set = Texas Red®

ATTO 565

Overview:

High fluorescence yield
High thermal and photostability
Good solubility in polar solvents
Excellent solubility in water
Very little aggregation
Rhodamine dye derivative
Molar Mass: 611 g/mol

ATTO 565 Datasheet

ATTO 565 Fluorophore Excitation and Emission Spectra

Optical Properties:

λ_ex = 563 nm

λ_em = 592 nm

ε_max = 1.2×10⁵

Φ_f = 0.9

τ_fl = 3.4 n

Brightness = 10

Laser = 532 nm

Filter set = TRITC

ATTO 488

Overview:

High fluorescence yield
High photostability
Very hydrophilic
Excellent solubility in water
Very little aggregation
New dye with net charge of -1
Molar Mass: 804 g/mol

ATTO 488 Datasheet

ATTO 488 Fluorophore Excitation and Emission Spectra

Optical Properties:

λ_ex = 501 nm

λ_em = 523 nm

ε_max = 9.0×10⁴

Φ_f = 0.80

τ_fl = 4.1 ns

Brightness = 72

Laser = 488 nm

Filter set = FITC

ATTO 390

Overview:

High fluorescence yield
Large Stokes-shift (89 nm)
Good photostability
Moderately hydrophilic
Good solubility in polar solvents
Coumarin derivate, uncharged
Low molar mass: 343.42 g/mol

ATTO 390 Datasheet

ATTO 390 Fluorescent Dye Excitation and Emission Spectra

Optical Properties:

λ_ex = 390 nm

λ_em = 479 nm

ε_max = 2.4×10⁴

Φ_f = 0.90

τ_fl = 5.0 ns

Brightness = 21.6

Laser = 365 or 405 nm

APC (Allophycocyanin)

Overview:

High quantum yield
Large phycobiliprotein
6 chromophores per molecule
Isolated from red algae
Molecular Weight: 105 kDa

APC Datasheet

APC Fluorophore Absorption and Emission Spectrum

Optical Properties:

λ_ex = 650 nm

λ_em = 660 nm

ε_max = 7.0×10⁵

Φ_f = 0.68

Brightness = 476

Laser = 594 or 633 nm

Filter set = Cy®5

Streptavidin

Properties:

Homo-tetrameric protein purified from Streptomyces avidinii which binds four biotin molecules with extremely high affinity
Molecular weight: 53 kDa
Formula: C₁₀H₁₆N₂O₃S
Applications: Western blot, immunohistochemistry, and ELISA

Streptavidin Datasheet

Biotin

Properties:

Binds tetrameric avidin proteins including Streptavidin and neuravidin with very high affinity
Molar mass: 244.31 g/mol
Formula: C₁₀H₁₆N₂O₃S
Applications: Western blot, immunohistochemistry, and ELISA

Biotin Datasheet

HRP (Horseradish peroxidase)

Properties:

Enzymatic activity is used to amplify weak signals and increase visibility of a target
Readily combines with hydrogen peroxide (H₂O₂) to form HRP-H₂O₂ complex which can oxidize various hydrogen donors
Catalyzes the conversion of:
- Chromogenic substrates (e.g. TMB, DAB, ABTS) into coloured products
- Chemiluminescent substrates (e.g. luminol and isoluminol) into light emitting products via enhanced chemiluminescence (ECL)
- Fluorogenic substrates (e.g. tyramine, homovanillic acid, and 4-hydroxyphenyl acetic acid) into fluorescent products
High turnover rate enables rapid generation of a strong signal
44 kDa glycoprotein
Extinction coefficient: 100 (403 nm)
Applications: Western blot, immunohistochemistry, and ELISA

HRP Datasheet

AP (Alkaline Phosphatase)

Properties:

Broad enzymatic activity for phosphate esters of alcohols, amines, pyrophosphate, and phenols
Commonly used to dephosphorylate the 5’-termini of DNA and RNA to prevent self-ligation
Catalyzes the conversion of:
- Chromogenic substrates (e.g. pNPP, naphthol AS-TR phosphate, BCIP) into coloured products
- Fluorogenic substrates (e.g. 4-methylumbelliferyl phosphate) into fluorescent products
Molecular weight: 140 kDa
Applications: Western blot, immunohistochemistry, and ELISA

AP Datasheet

R-PE (R-Phycoerythrin)

Overview:

Broad excitation spectrum
High quantum yield
Photostable
Member of the phycobiliprotein family
Isolated from red algae
Excellent solubility in water
Molecular Weight: 250 kDa

R-PE Datasheet

R-PE Fluorophore Excitation and Emission Spectra

Optical Properties:

λ_ex = 565 nm

λ_em = 575 nm

ε_max = 2.0×10⁶

Φ_f = 0.84

Brightness = 1.68 x 10³

Laser = 488 to 561 nm

Filter set = TRITC

Properties

Storage Buffer	PBS pH 7.4, 50% glycerol, 0.09% Sodium Azide
Storage Temperature	-20ºC
Shipping Temperature	Blue Ice or 4ºC
Purification	Protein G Purified
Clonality	Monoclonal
Clone Number	9F12
Isotype	IgG1
Specificity	Specific for 3,5-Dibromo-tyrosine. Does not cross-react with Nitrotyrosine.
Cite This Product	StressMarq Biosciences Cat# SMC-507, RRID: AB_2702765
Certificate of Analysis	A 1:1000 dilution of SMC-507 was sufficient for detection of 3,5-Dibromotyrosine in 1 µg of 3, 5-Dibromotyrosine conjugated to BSA by ECL immunoblot analysis using Goat Anti-Mouse IgG:HRP as the secondary Antibody.

Biological Description

Alternative Names	3,5-Dibromo-tyrosine Antibody, 3,5-dibromotyrosine Antibody, Dibromotyrosine Antibody, Dibromo-tyrosine Antibody, DiBrY Antibody, Dibromotyrosine (DiBrY) Antibody, Dibromo-Tyrosine (DiBrY) Antibody, Dibromo-tyrosine [DiBrY] Antibody
Research Areas	Cancer, Cell Signaling, Oxidation, Oxidative Stress, Post-translational Modifications, Protein Oxidation

Product Images

<p>Immunocytochemistry/Immunofluorescence analysis using Mouse Anti-Dibromo-tyrosine Monoclonal Antibody, Clone 9F12 (SMC-507). Tissue: Embryonic kidney cells (HEK293). Species: Human. Fixation: 5% Formaldehyde for 5 min. Primary Antibody: Mouse Anti-Dibromo-tyrosine Monoclonal Antibody (SMC-507) at 1:50 for 30-60 min at RT. Secondary Antibody: Goat Anti-Mouse Alexa Fluor 488 at 1:1500 for 30-60 min at RT. Counterstain: Phalloidin Alexa Fluor 633 F-Actin stain; DAPI (blue) nuclear stain at 1:250, 1:50000 for 30-60 min at RT. Magnification: 20X (2X Zoom). (A,C,E,G) – Untreated. (B,D,F,H) – Cells cultured overnight with 50 µM H2O2. (A,B) DAPI (blue) nuclear stain. (C,D) Phalloidin Alex Fluor 633 F-Actin stain. (E,F) Dibromo-tyrosine Antibody. (G,H) Composite. Courtesy of: Dr. Robert Burke, University of Victoria.</p>

Immunocytochemistry/Immunofluorescence analysis using Mouse Anti-Dibromo-tyrosine Monoclonal Antibody, Clone 9F12 (SMC-507). Tissue: Embryonic kidney cells (HEK293). Species: Human. Fixation: 5% Formaldehyde for 5 min. Primary Antibody: Mouse Anti-Dibromo-tyrosine Monoclonal Antibody (SMC-507) at 1:50 for 30-60 min at RT. Secondary Antibody: Goat Anti-Mouse Alexa Fluor 488 at 1:1500 for 30-60 min at RT. Counterstain: Phalloidin Alexa Fluor 633 F-Actin stain; DAPI (blue) nuclear stain at 1:250, 1:50000 for 30-60 min at RT. Magnification: 20X (2X Zoom). (A,C,E,G) – Untreated. (B,D,F,H) – Cells cultured overnight with 50 µM H2O2. (A,B) DAPI (blue) nuclear stain. (C,D) Phalloidin Alex Fluor 633 F-Actin stain. (E,F) Dibromo-tyrosine Antibody. (G,H) Composite. Courtesy of: Dr. Robert Burke, University of Victoria.

<p>Western Blot analysis of 3, 5-Dibromotyrosine-BSA Conjugate showing detection of 67 kDa 3,5-Dibromotyrosine-BSA using Mouse Anti-3,5-Dibromotyrosine Monoclonal Antibody, Clone 9F12 (SMC-507). Lane 1: Molecular Weight Ladder (MW). Lane 2: BSA. Lane 3: Nitrosylated-BSA. Lane 4: Dibromotyrosine-BSA. Load: 1 µg. Block: 5% Skim Milk in TBST. Primary Antibody: Mouse Anti-3,5-Dibromotyrosine Monoclonal Antibody (SMC-507) at 1:1000 for 2 hours at RT. Secondary Antibody: Goat Anti-Mouse IgG: HRP at 1:2000 for 60 min at RT. Color Development: ECL solution for 5 min in RT. Predicted/Observed Size: 67 kDa.</p>

Western Blot analysis of 3, 5-Dibromotyrosine-BSA Conjugate showing detection of 67 kDa 3,5-Dibromotyrosine-BSA using Mouse Anti-3,5-Dibromotyrosine Monoclonal Antibody, Clone 9F12 (SMC-507). Lane 1: Molecular Weight Ladder (MW). Lane 2: BSA. Lane 3: Nitrosylated-BSA. Lane 4: Dibromotyrosine-BSA. Load: 1 µg. Block: 5% Skim Milk in TBST. Primary Antibody: Mouse Anti-3,5-Dibromotyrosine Monoclonal Antibody (SMC-507) at 1:1000 for 2 hours at RT. Secondary Antibody: Goat Anti-Mouse IgG: HRP at 1:2000 for 60 min at RT. Color Development: ECL solution for 5 min in RT. Predicted/Observed Size: 67 kDa.

<p>Western Blot analysis of Human Cervical Cancer cell line (HeLa) showing detection of 3,5-Dibromotyrosine-BSA using Mouse Anti-3,5-Dibromotyrosine Monoclonal Antibody, Clone 9F12 (SMC-507). Lane 1: Molecular Weight Ladder (MW). Lane 2: HeLa cell lysate. Lane 3: H2O2 treated HeLa cell lysate. Load: 12 µg. Block: 5% Skim Milk in TBST. Primary Antibody: Mouse Anti-3,5-Dibromotyrosine Monoclonal Antibody (SMC-507) at 1:1000 for 2 hours at RT. Secondary Antibody: Goat Anti-Mouse IgG: HRP at 1:2000 for 60 min at RT. Color Development: ECL solution for 5 min in RT.</p>

Western Blot analysis of Human Cervical Cancer cell line (HeLa) showing detection of 3,5-Dibromotyrosine-BSA using Mouse Anti-3,5-Dibromotyrosine Monoclonal Antibody, Clone 9F12 (SMC-507). Lane 1: Molecular Weight Ladder (MW). Lane 2: HeLa cell lysate. Lane 3: H2O2 treated HeLa cell lysate. Load: 12 µg. Block: 5% Skim Milk in TBST. Primary Antibody: Mouse Anti-3,5-Dibromotyrosine Monoclonal Antibody (SMC-507) at 1:1000 for 2 hours at RT. Secondary Antibody: Goat Anti-Mouse IgG: HRP at 1:2000 for 60 min at RT. Color Development: ECL solution for 5 min in RT.

Product Citations (0)

Currently there are no citations for this product.

HRP (Horseradish peroxidase)

Properties:

Enzymatic activity is used to amplify weak signals and increase visibility of a target
Readily combines with hydrogen peroxide (H₂O₂) to form HRP-H₂O₂ complex which can oxidize various hydrogen donors
Catalyzes the conversion of:
- Chromogenic substrates (e.g. TMB, DAB, ABTS) into coloured products
- Chemiluminescent substrates (e.g. luminol and isoluminol) into light emitting products via enhanced chemiluminescence (ECL)
- Fluorogenic substrates (e.g. tyramine, homovanillic acid, and 4-hydroxyphenyl acetic acid) into fluorescent products
High turnover rate enables rapid generation of a strong signal
44 kDa glycoprotein
Extinction coefficient: 100 (403 nm)
Applications: Western blot, immunohistochemistry, and ELISA

HRP Datasheet

StressMarq硫黄素T测定硫黄素T是一种荧光染料，可与富含β片层的结构（例如α突触核蛋白原纤维中的结构）结合。结合后，染料的发射光谱发生红移并增加了荧光强度。以下方案用于使用α突触核蛋白预制的原纤维和单体生成硫黄素T测定法。准备dH2O中的1mM硫黄素T储备溶液（新鲜制备，并通过0.2μm注射器过滤器过滤）。在PBS pH 7.4中稀释硫黄素T，使每孔中硫黄素T的最终浓度为25μM（每孔体积= 100μL）。板：Lumox 96多孔板（Sarstedt目录号94.6000.024）。使用前在室温下解冻α-突触核蛋白等分试样。将10μM预制纤维或100μM单体（或两者）添加到适当的孔中。用移液器上下吸取混合液。浓度是估算值，需要进行优化以给出良好的信号而不会造成浪费。密封板并置于37°C的振荡培养箱（600 rpm）中。使用Softmax Pro软件6.5.1版在Molecular Devices Gemini XPS微孔板读取器上测量荧光。 XPS微孔板读取器设置：温度：37°C读取类型：阱扫描波长：450 nm处的激发和485 nmPMT 处的发射增益：每次读取自动闪烁：6次摇动：读取前20秒7.重新密封板并放入37°C的振荡培养箱中。8.定期从1到72小时获取读数。

资质认证

获得国家资质，权威认证！
全国联保

全国联保，官方无忧售后
正规发票

正规发票，放心购买
签订合同

签订合同，保障您的权益

/**/